- alias: ATP Guest Overnight Limit Damper Overheat Overcool 2200 - 0630
  description: This automation simply stops the room damper opening past a certian
    percentage. When a single room is heating / cooling at night the Airtouch would
    completely open the damper and as a result the room would get very hot or cold.
    This was particularly noticable in smaller rooms. This automation reduces the
    maximum heating or cooling to the room.
  triggers:
  - trigger: numeric_state
    entity_id:
    - cover.pa_guest_damper
    attribute: current_position
    above: 61
    for:
      hours: 0
      minutes: 0
      seconds: 2
  conditions:
  - alias: HVAC is in heating or cooling mode
    condition: or
    conditions:
    - condition: state
      entity_id: climate.pa_daikin
      state: cool
    - condition: state
      entity_id: climate.pa_daikin
      state: heat
  - alias: Room is enabled
    condition: state
    entity_id: cover.pa_guest_damper
    state: open
  - condition: time
    before: 06:30:00
    after: '21:30:00'
  - alias: Current temperature is at least 0.3 degrees from target
    condition: or
    conditions:
    - alias: Heating mode & no more than 0.2 degrees above the setpoint
      condition: and
      conditions:
      - condition: state
        entity_id: climate.pa_daikin
        state: heat
      - condition: template
        value_template: "{{ state_attr(\"climate.pa_guest\", \"current_temperature\"\
          ) -\n      state_attr(\"climate.pa_guest\", \"temperature\") <= 0.25}}"
    - alias: Cooling mode & no more than 0.2 degrees below the setpoint
      condition: and
      conditions:
      - condition: state
        entity_id: climate.pa_daikin
        state: cool
      - condition: template
        value_template: '{{ (state_attr("climate.pa_guest", "temperature") - state_attr("climate.pa_guest",
          "current_temperature") <= 0.25 ) }}'
  actions:
  - alias: Damper to 60%
    action: cover.set_cover_position
    data:
      position: 60
    target:
      entity_id: cover.pa_guest_damper
  - alias: Reset to temperature control
    action: climate.set_temperature
    data:
      temperature: '{{ state_attr(''climate.pa_guest'', ''temperature'') }}'
    target:
      entity_id:
      - climate.pa_guest
  mode: single
- alias: AT All zones off turn off system
  description: When all zones are turned off, turn off the whole Airtouch system
  trigger:
  - platform: state
    entity_id:
    - climate.itc_living
    to: 'off'
  - platform: state
    entity_id:
    - climate.itc_master
    to: 'off'
  - platform: state
    entity_id:
    - climate.itc_small_bedroom
    to: 'off'
  - platform: state
    entity_id:
    - climate.itc_guest
    to: 'off'
  condition:
  - condition: state
    entity_id: climate.itc_living
    state: 'off'
    for:
      hours: 0
      minutes: 1
      seconds: 0
  - condition: state
    entity_id: climate.itc_small_bedroom
    state: 'off'
    for:
      hours: 0
      minutes: 1
      seconds: 0
  - condition: state
    entity_id: climate.itc_master
    state: 'off'
    for:
      hours: 0
      minutes: 1
      seconds: 0
  - condition: state
    entity_id: climate.itc_guest
    state: 'off'
    for:
      hours: 0
      minutes: 1
      seconds: 0
  action:
  - service: climate.set_hvac_mode
    data:
      hvac_mode: 'off'
    target:
      entity_id: climate.ac_daikin
  mode: single
- alias: AT Off Reset to ITC daytime
  description: Reset dampers to a known set position when the system is  turned off
    during the day. Don't do this at night as a restart, power cut or exception in
    the log can prevent the state being restored if power comes back on.
  trigger:
  - platform: state
    entity_id:
    - climate.ac_daikin
    to: 'off'
  condition:
  - condition: time
    after: 07:00:00
    before: '22:00:00'
  action:
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id:
      - climate.itc_guest
      - climate.itc_small_bedroom
      - climate.itc_master
      - climate.itc_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.set_percentage
    data:
      percentage: 0
    target:
      entity_id:
      - fan.damper_master
      - fan.damper_guest
      - fan.damper_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.set_percentage
    data:
      percentage: 100
    target:
      entity_id:
      - fan.damper_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id:
      - climate.itc_guest
      - climate.itc_living
      - climate.itc_master
      - climate.itc_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.turn_off
    target:
      entity_id:
      - fan.damper_guest
      - fan.damper_master
      - fan.damper_small_bedroom
    data: {}
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.turn_on
    target:
      entity_id:
      - fan.damper_living
    data: {}
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_temperature
    data:
      temperature: 21
    target:
      entity_id: climate.itc_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_temperature
    data:
      temperature: 20
    target:
      entity_id:
      - climate.itc_small_bedroom
      - climate.itc_guest
      - climate.itc_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_fan_mode
    data:
      fan_mode: low
    target:
      entity_id: climate.ac_daikin
  - choose:
    - conditions:
      - condition: template
        value_template: '{{ now().month in [12, 1, 2, 3] }}'
        alias: Month is Dec - Mar inclusive
      sequence:
      - service: climate.set_fan_mode
        metadata: {}
        data:
          fan_mode: low
        target:
          entity_id: climate.ac_daikin
    default:
    - service: climate.set_fan_mode
      metadata: {}
      data:
        fan_mode: medium
      target:
        entity_id: climate.ac_daikin
  mode: single
- alias: ATSP Guest Overcooling Shut Down Damper
  description: If the ducted unit is cooling, the temperature is 0.4C below the setpoint
    and the damper is more than 39% open, close the damper down to 10%
  triggers:
  - alias: Ducted cool mode, damper over 39%, and current is 0.4C below setpoint (e.g.
      setpoint 20, will trigger at 19.6)
    trigger: template
    value_template: "{{ states('sensor.daikin_ducted_hvac_state') == 'cool' and state_attr(\"\
      cover.pa_guest_damper\", \"current_position\") | int > 39 and ((state_attr(\"\
      climate.pa_guest\", \"temperature\") -\n      state_attr(\"climate.pa_guest\"\
      , \"current_temperature\")) | round(1) >= 0.4 ) }}"
    for:
      hours: 0
      minutes: 1
      seconds: 0
  conditions:
  - condition: state
    entity_id: climate.pa_guest
    attribute: control_method
    state: temperature
  actions:
  - alias: Damper to 10%
    action: cover.set_cover_position
    data:
      position: 10
    target:
      entity_id: cover.pa_guest_damper
  - alias: Set damper back to temperature control
    metadata: {}
    data:
      temperature: '{{ state_attr(''climate.pa_guest'', ''temperature'') }}'
    target:
      entity_id: climate.pa_guest
    action: climate.set_temperature
  mode: single
- alias: ATP Guest Overheat Fix
  description: If room is 0.3 degrees over setpoint reduce the damper. This is useful
    when using the spill fix actions which keep the dampers open for longer. Airtouch
    ramps the damper position down slowly, too slowly given the damper manipulation
    being done, so we have to bring it down quickly ourselves to prevent overheating.
  triggers:
  - alias: Current temperature is 0.3 degrees above room setpoint
    value_template: '{{ state_attr("climate.pa_guest", "current_temperature") - state_attr("climate.pa_guest",
      "temperature") > 0.25}}'
    trigger: template
  conditions:
  - condition: state
    entity_id: climate.pa_daikin
    state: heat
  - condition: state
    entity_id: cover.pa_guest_damper
    state: open
  - condition: numeric_state
    entity_id: cover.pa_guest_damper
    above: 42
    attribute: current_position
    below: 105
  - condition: state
    entity_id: climate.pa_guest
    attribute: control_method
    state: temperature
  actions:
  - alias: Reduce damper position
    action: cover.set_cover_position
    data:
      position: 30
    target:
      entity_id: cover.pa_guest_damper
  - alias: Set room back to temperature control
    metadata: {}
    data:
      temperature: '{{ state_attr(''climate.pa_guest'', ''temperature'') }}'
    target:
      entity_id: climate.pa_guest
    action: climate.set_temperature
  mode: single
- alias: ATP Off Reset to defaults
  description: Reset everything to our preferred modes if turned off during the day.
    Don't reset at night as a restart or exception in the log can prevent bedroom
    heating
  triggers:
  - entity_id:
    - climate.pa_daikin
    to: 'off'
    trigger: state
  conditions:
  - condition: time
    after: 07:00:00
    before: '22:00:00'
  actions:
  - metadata: {}
    data: {}
    action: script.reset_airtouch
  - alias: If its between 6pm and 7pm preset the Airtouch to heat mode / 23c without
      turning it on. Make sure to set up the associated script in script-reset-airtouch.yaml.
      I cant remember why I set this up but I probably had a good reason.
    if:
    - condition: time
      after: '18:00:00'
      before: '19:00:00'
    then:
    - alias: Set Airtouch to Heat mode without turning it on
      action: airtouch.set_hvac_mode_only
      metadata: {}
      data:
        hvac_mode: heat
      target:
        entity_id: climate.pa_daikin
    - action: climate.set_temperature
      metadata: {}
      data:
        temperature: 23
      target:
        entity_id: climate.pa_lounge
  mode: single
- alias: ATSP Guest Spill Fix Cooling Daytime Fast Cooling
  description: If damper is 20% - 90% and no more than 0.25 degrees below setpoint
    open the damper fully. This is to ensure fast cooling and to reduce spill. The
    20 second limit aims to stop constantly oscillation in damper settings.
  triggers:
  - trigger: numeric_state
    entity_id:
    - cover.pa_guest_damper
    attribute: current_position
    above: 16
    below: 91
    for:
      hours: 0
      minutes: 0
      seconds: 20
  conditions:
  - condition: state
    entity_id: climate.pa_daikin
    state: cool
  - alias: Room is enabled
    condition: state
    entity_id: cover.pa_guest_damper
    state: open
  - condition: time
    after: 09:00:00
    before: '19:00:00'
  - alias: Current room temperature is no more than 0.25 degrees below target temperature
    condition: template
    value_template: '{{ (state_attr("climate.pa_guest", "temperature") - state_attr("climate.pa_guest",
      "current_temperature") <= 0.25 )  }}'
  - alias: Outside unit state is cool. Without this the action triggers constantly.
    condition: state
    entity_id: sensor.daikin_ducted_hvac_state
    state: cool
  actions:
  - alias: Damper to 100%
    action: cover.set_cover_position
    data:
      position: 100
    target:
      entity_id: cover.pa_guest_damper
  - alias: Reset to temperature control
    action: climate.set_temperature
    data:
      temperature: '{{ state_attr(''climate.pa_guest'', ''temperature'') }}'
    target:
      entity_id:
      - climate.pa_guest
  mode: single
- alias: ATP Guest Spill Fix Heat Daytime
  description: If Guest damper is 20% - 90% and no more than 0.2 degrees above setpoint
    open the damper fully. This is to ensure fast heating and to reduce spill. The
    20 second limit aims to stop constantly oscillation in damper settings.
  triggers:
  - trigger: numeric_state
    entity_id:
    - cover.pa_guest_damper
    attribute: current_position
    above: 16
    below: 91
    for:
      hours: 0
      minutes: 0
      seconds: 20
  - alias: Trigger on room temperature changes - this is a more reliable trigger due
      to the way HA triggers work with ranges
    trigger: state
    entity_id:
    - climate.pa_guest
    attribute: current_temperature
  conditions:
  - condition: state
    entity_id: climate.pa_daikin
    state: heat
  - alias: Room is enabled
    condition: state
    entity_id: cover.pa_guest_damper
    state: open
  - condition: time
    after: 09:00:00
    before: '21:00:00'
  - alias: Current room temperature is no more than 0.2 degrees above target temperature
    condition: template
    value_template: '{{ state_attr("climate.pa_guest", "current_temperature") - state_attr("climate.pa_guest",
      "temperature") < 0.25}}'
  - alias: Damper is not fully open and is not about to close
    condition: numeric_state
    entity_id: cover.pa_guest_damper
    attribute: current_position
    above: 16
    below: 91
  - condition: state
    entity_id: sensor.daikin_ducted_hvac_state
    state: heat
    alias: Outside unit state is heat. Without this the action triggers constantly.
      This requires either a power usage detector on the circuit running the heat
      pump or the AppDaemon "hvac_energymonitor1" script, which as of May 2025 I havent
      released yet. Experimentation will be required to make this work properly without
      either
  actions:
  - alias: Damper to 100%
    action: cover.set_cover_position
    data:
      position: 100
    target:
      entity_id: cover.pa_guest_damper
  - action: climate.set_temperature
    data:
      temperature: '{{ state_attr(''climate.pa_guest'', ''temperature'') }}'
    target:
      entity_id:
      - climate.pa_guest
  mode: single
- alias: ATP Airtouch Console Off Time Reset
  description: When the automatic off time is reset / removed on the Airtouch console
    clear the timer in HA
  triggers:
  - trigger: state
    entity_id:
    - time.pa_daikin_off_timer
    to: unknown
    from: null
  conditions: []
  actions:
  - action: script.atp_clear_off_timer
    metadata: {}
    data: {}
  mode: single
- alias: ATP Airtouch Console On Time Reset
  description: When the automatic on time is reset / removed on the Airtouch console
    clear the timer in HA
  triggers:
  - trigger: state
    entity_id:
    - time.pa_daikin_on_timer
    to: unknown
    from: null
  conditions: []
  actions:
  - action: script.atp_clear_on_timer
    metadata: {}
    data: {}
  mode: single
- alias: ATP Airtouch Timers Set Off Time to Absolute
  description: Set the Airtouch off timer to the value entered in the time setter
  triggers:
  - entity_id: input_datetime.pa_daikin_airtouch_off_time
    trigger: state
  actions:
  - action: time.set_value
    data:
      time: '{{ states(''input_datetime.pa_daikin_airtouch_off_time'') }}'
    target:
      entity_id: time.pa_daikin_off_timer
  mode: single
- alias: ATP Airtouch Timers Set On Time to Absolute
  description: Set the Airtouch on timer to the value entered in the time setter
  triggers:
  - entity_id: input_datetime.pa_daikin_airtouch_on_time
    trigger: state
  conditions: []
  actions:
  - action: time.set_value
    data:
      time: '{{ states(''input_datetime.pa_daikin_airtouch_on_time'') }}'
    target:
      entity_id: time.pa_daikin_on_timer
  mode: single
- alias: ATP Airtouch Timers  Off From Delay
  description: Turn the Airtouch off after a configurable delay from a slider
  triggers:
  - trigger: state
    entity_id:
    - input_number.ducted_ac_airtouch_off_timer
  conditions: []
  actions:
  - alias: Set the off time for the Airtouch
    action: airtouch.set_timer_from_delay
    data:
      delay:
        minutes: '{{ states(''input_number.ducted_ac_airtouch_off_timer'') | float
          }}'
    target:
      entity_id: time.pa_daikin_off_timer
  - alias: Update the text field with the off time
    action: input_text.set_value
    target:
      entity_id:
      - input_text.pa_daikin_airtouch_off_delay
    data:
      value: "{% set minutes = states('input_number.ducted_ac_airtouch_off_timer')\
        \ | int %} {% if minutes == 0 %}\n  {{ '' }}\n{% else %}\n  {{ (now() + timedelta(minutes=minutes)).strftime('%H:%M')\
        \ }}\n{% endif %}\n"
  - action: script.notify_tim
    metadata: {}
    data:
      message: Airtouch Off Timer Set {{ states('input_number.ducted_ac_airtouch_off_timer')
        | int }}
    enabled: false
  mode: single
- alias: ATP Airtouch Timers On From Delay
  description: Turn the Airtouch on after a configurable delay set via a slider
  triggers:
  - trigger: state
    entity_id:
    - input_number.ducted_ac_airtouch_on_timer
  conditions: []
  actions:
  - alias: Set the delay on the Airtouch
    action: airtouch.set_timer_from_delay
    data:
      delay:
        minutes: '{{ states(''input_number.ducted_ac_airtouch_on_timer'') | float
          }}'
    target:
      entity_id: time.pa_daikin_on_timer
  - alias: Update the text field with the on time
    action: input_text.set_value
    target:
      entity_id:
      - input_text.pa_daikin_airtouch_on_delay
    data:
      value: "{% set minutes = states('input_number.ducted_ac_airtouch_on_timer')\
        \ | int %} {% if minutes == 0 %}\n  {{ '' }}\n{% else %}\n  {{ (now() + timedelta(minutes=minutes)).strftime('%H:%M')\
        \ }}\n{% endif %}\n"
  - action: script.notify_tim
    metadata: {}
    data:
      message: Airtouch ON Timer Set {{ states('input_number.ducted_ac_airtouch_on_timer')
        | int }}
    enabled: false
  mode: single
- alias: Office 0530 weekdays below 11
  description: Turn on the office to 22deg at 5.30am weekdays from March to November
  trigger:
  - platform: time
    at: 05:30:00
  condition:
  - condition: state
    entity_id: input_boolean.office_automations_enabled
    state: 'on'
  - condition: time
    before: 00:00:00
    weekday:
    - mon
    - tue
    - thu
    - fri
    - wed
    after: 00:00:00
  - condition: template
    value_template: '{{ now().month in [3, 4, 5, 6, 7, 8, 9, 10] }}'
    alias: Month is Mar - Oct
  - condition: numeric_state
    entity_id: sensor.officesensor_temperature
    below: 11
  action:
  - service: climate.set_hvac_mode
    data:
      hvac_mode: heat
    target:
      entity_id: climate.office_daikin
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_temperature
    data:
      temperature: 22
    target:
      entity_id: climate.office_daikin
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_fan_mode
    data:
      fan_mode: '3'
    target:
      entity_id: climate.office_daikin
  mode: single
- alias: AT 1130 Ventilation On Airtouch Winter May to Oct
  description: Turn on positive pressure ventilation and Airtouch fan mode to the
    bedrooms in summer
  trigger:
  - platform: time
    at: '11:30:00'
  condition:
  - condition: state
    entity_id: input_boolean.ducted_ventilation_automations_enabled
    state: 'on'
  - condition: template
    value_template: '{{ now().month in [5, 6, 7, 8, 9, 10] }}'
    alias: Month is May - Oct
  - condition: state
    entity_id: climate.ac_daikin
    state: 'off'
    enabled: true
  action:
  - type: turn_on
    device_id: positive-pressure-ventilation-device-id
    entity_id: switch.ventilation
    domain: switch
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id:
      - climate.itc_living
      - climate.itc_small_bedroom
      - climate.itc_master
  - service: fan.turn_off
    data: {}
    target:
      entity_id: fan.damper_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.set_percentage
    data:
      percentage: 100
    target:
      entity_id:
      - fan.damper_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.set_percentage
    data:
      percentage: 30
    target:
      entity_id: fan.itc_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.turn_on
    data: {}
    target:
      entity_id:
      - fan.itc_small_bedroom
      - fan.damper_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_hvac_mode
    data:
      hvac_mode: fan_only
    target:
      entity_id: climate.ac_daikin
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_fan_mode
    data:
      fan_mode: medium
    target:
      entity_id: climate.ac_daikin
  - delay:
      hours: 0
      minutes: 60
      seconds: 0
      milliseconds: 0
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id:
      - fan.damper_small_bedroom
      - fan.damper_living
      - fan.damper_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - choose:
    - conditions:
      - condition: state
        entity_id: climate.ac_daikin
        state: fan_only
      sequence:
      - service: climate.turn_off
        data: {}
        target:
          entity_id: climate.ac_daikin
    alias: Turn off the Airtouch if its in fan mode. This allows it to keep running
      if its manually been changed to heating or cooling
  - type: turn_off
    device_id: positive-pressure-ventilation-device-id
    entity_id: switch.ventilation
    domain: switch
  mode: single
- alias: Notification System Log All
  description: When a system log entry is made send it out by email
  trigger:
  - platform: event
    event_type: system_log_event
  condition: []
  action:
  - service: notify.email_service_name
    data:
      title: HA log entry made
      message: '{{ trigger.event.data.message[0] }}'
  mode: single
- alias: AT 1800 Living Heating May to Sept
  description: Simple automation to bring the living area up to preferred temperatures
    during the colder months of the year
  trigger:
  - platform: time
    at: '18:00:00'
  condition:
  - condition: state
    entity_id: input_boolean.ducted_heating_automations_enabled
    state: 'on'
    enabled: false
    alias: This ties into my room control system, so I can easily control whether
      automations are active or not. This lets me turn off all heating automations
      on warm days or turn off all automations while on holiday
  - condition: template
    value_template: '{{ now().month in [5, 6, 7, 8, 9] }}'
    alias: Month is May - Nov
  action:
  - service: fan.turn_on
    data:
      preset_mode: ITC
    target:
      entity_id:
      - fan.damper_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 2
      milliseconds: 0
  - service: climate.set_hvac_mode
    data:
      hvac_mode: heat
    target:
      entity_id: climate.ac_daikin
  - delay:
      hours: 0
      minutes: 0
      seconds: 2
      milliseconds: 0
  - if:
    - condition: numeric_state
      entity_id: climate.itc_living
      attribute: temperature
      below: 23
    then:
    - service: climate.set_temperature
      metadata: {}
      data:
        temperature: 23
      target:
        entity_id: climate.itc_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 2
      milliseconds: 0
  - service: climate.set_fan_mode
    data:
      fan_mode: high
    target:
      entity_id: climate.ac_daikin
  - delay:
      hours: 0
      minutes: 10
      seconds: 0
      milliseconds: 0
  - service: fan.turn_on
    data:
      preset_mode: Damper
    target:
      entity_id:
      - fan.damper_master
      - fan.damper_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.set_percentage
    data:
      percentage: 5
    target:
      entity_id:
      - fan.damper_master
      - fan.damper_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.turn_on
    data:
      preset_mode: ITC
    target:
      entity_id:
      - fan.damper_master
      - fan.damper_small_bedroom
  - delay:
      hours: 0
      minutes: 0
      seconds: 2
      milliseconds: 0
  - service: climate.set_temperature
    data:
      temperature: 20
    target:
      entity_id:
      - climate.itc_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 2
      milliseconds: 0
  - service: climate.set_temperature
    data:
      temperature: 20
    target:
      entity_id: climate.itc_small_bedroom
  - delay:
      hours: 0
      minutes: 10
      seconds: 0
      milliseconds: 0
  - service: climate.set_fan_mode
    data:
      fan_mode: medium
    target:
      entity_id: climate.ac_daikin
  mode: single
- alias: AT Guest Spill Fix Heat
  description: If guest bedroom damper is slightly open for 30 seconds, and the current
    temperature is below or equal to the target temperature, open the damper wider
    to prevent lounge overheat. This is only enabled at night as during the day it
    doesnt matter.
  trigger:
  - platform: numeric_state
    entity_id: fan.damper_guest
    for:
      hours: 0
      minutes: 0
      seconds: 30
    attribute: percentage
    below: 21
    above: 1
  condition:
  - condition: device
    device_id: airtouch4_device_id
    domain: climate
    entity_id: climate.ac_daikin
    type: is_hvac_mode
    hvac_mode: heat
  - condition: state
    entity_id: fan.damper_guest
    state: 'on'
  - condition: state
    entity_id: climate.itc_guest
    attribute: preset_mode
    state: ITC
  - condition: time
    before: 07:00:00
    after: '13:00:00'
    enabled: false
  - condition: template
    value_template: '{{ state_attr("climate.itc_guest", "current_temperature") - state_attr("climate.itc_guest",
      "temperature") <= 0.2}}'
    alias: Current room temperature is no more than 0.2 degrees above target temperature
  action:
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id: fan.damper_guest
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.set_percentage
    data:
      percentage: 40
    target:
      entity_id: fan.damper_guest
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id: fan.damper_guest
  mode: single
- alias: AT Master Spill Fix Heat
  description: If Master bedroom damper is slightly open for 30 seconds, and the current
    temperature is below or equal to the target temperature, open the damper wider
    to prevent lounge overheat. This is only enabled at night as during the day it
    doesnt matter.
  trigger:
  - platform: numeric_state
    entity_id: fan.damper_master
    for:
      hours: 0
      minutes: 0
      seconds: 30
    attribute: percentage
    below: 21
    above: 1
  condition:
  - condition: device
    device_id: airtouch4_device_id
    domain: climate
    entity_id: climate.ac_daikin
    type: is_hvac_mode
    hvac_mode: heat
  - condition: state
    entity_id: fan.damper_master
    state: 'on'
  - condition: state
    entity_id: climate.itc_master
    attribute: preset_mode
    state: ITC
  - condition: time
    before: 07:00:00
    after: '16:00:00'
    enabled: false
  - alias: Current room temperature is no more than 0.2 degrees above target temperature
    condition: template
    value_template: '{{ state_attr("climate.itc_master", "current_temperature") -
      state_attr("climate.itc_master", "temperature") <= 0.2}}'
  action:
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id:
      - climate.itc_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: fan.set_percentage
    data:
      percentage: 40
    target:
      entity_id: fan.damper_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id:
      - climate.itc_master
  trace:
    stored_traces: 50
  mode: single
- alias: AT Master Overnight Limit Damper Overheat Overcool 2200 - 0700
  description: When Master bedroom damper is open wider than 66% for 5 seconds at
    night close the damper down. If this is not done the room tends to get really
    hot while heating is on. For smaller bedrooms I tend to set the limits lower -
    for a small bedroom if the damper is over 58% I reset the damper to 50%
  trigger:
  - platform: numeric_state
    entity_id:
    - fan.damper_master
    for:
      hours: 0
      minutes: 0
      seconds: 5
    attribute: percentage
    above: 66
  condition:
  - condition: device
    device_id: airtouch4_device_id
    domain: climate
    entity_id: climate.ac_daikin
    type: is_hvac_mode
    hvac_mode: heat
    enabled: false
  - alias: Ducted Daikin is in heating or cooling mode
    condition: or
    conditions:
    - condition: state
      entity_id: climate.ac_daikin
      state: cool
    - condition: state
      entity_id: climate.ac_daikin
      state: heat
  - condition: state
    entity_id: fan.damper_master
    state: 'on'
  - condition: state
    entity_id: climate.itc_master
    attribute: preset_mode
    state: ITC
  - condition: time
    before: 07:30:00
    after: '22:00:00'
  action:
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id: climate.itc_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.set_percentage
    data:
      percentage: 65
    target:
      entity_id: fan.damper_master
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id: climate.itc_master
    enabled: true
  mode: single
- alias: AT Heating Spill Bedrooms
  description: Alerts if any spill goes into the bedrooms in heat mode. Multiple alerts
    to get attention, then voice alert.
  trigger:
  - platform: state
    entity_id:
    - binary_sensor.zone_spill_guest
    to: 'on'
    enabled: false
  - platform: state
    entity_id:
    - binary_sensor.zone_spill_small_bedroom
    to: 'on'
  - platform: state
    entity_id:
    - binary_sensor.zone_spill_master
    to: 'on'
  condition:
  - condition: state
    entity_id: climate.ac_daikin
    state: heat
  action:
  - service: climate.set_preset_mode
    data:
      preset_mode: Damper
    target:
      entity_id:
      - climate.itc_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 250
  - service: fan.set_percentage
    data:
      percentage: 100
    target:
      entity_id:
      - fan.damper_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: climate.set_preset_mode
    data:
      preset_mode: ITC
    target:
      entity_id:
      - climate.itc_living
  - delay:
      hours: 0
      minutes: 0
      seconds: 0
      milliseconds: 500
  - service: fan.turn_on
    metadata: {}
    data: {}
    target:
      entity_id: fan.damper_living
  - service: notify.mobile_app_devicename
    data:
      message: Heating spill into bedrooms. Lounge damper fully opened to mitigate
      data:
        ttl: 0
        priority: high
        channel: alarm_stream
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: notify.mobile_app_devicename
    data:
      data:
        ttl: 0
        priority: high
        channel: alarm_stream
      message: Heating spill into bedrooms. Lounge damper fully opened to mitigate
  - delay:
      hours: 0
      minutes: 0
      seconds: 1
      milliseconds: 0
  - service: notify.mobile_app_devicename
    data:
      message: TTS
      title: Testing test test
      data:
        ttl: 0
        priority: high
        channel: alarm_stream_max
        tts_text: Attention! Attention! Heat is spilling into the bedrooms! Change
          spill settings!
  mode: single